Wraith25 Cinewhoop
Whether you’re trying to meet a certain weight goal or are just in need of an ultra lite cinewhoop look no further. Countless hours and many reiterations later, I am pleased to introduce my very first frame.
Purchasing will also grant access to my actual tuning profile along with every 3d print for varying setups. Speaking of setups here is a recommended parts list:
-1404 Motors 3500-5000kv (9×9 Mounting)
-Any 35a or 45a 25×25 aio
-DJI O4 Pro recommended but any vtx with 20×20 or 25×25 mounting will work
Weight(s)
-Frame 37g
-Drone 149g (GepRC 1404’s 4600kv, GepRC 35a aio, DJI O4 Pro)
-AUW 279g (GoPro Bones and Tattu 650mah) A standard naked GoPro should get you sub250, worst case you’d have to pair that with a 550 or 600mah battery. If that’s what you’re after)
*The FAB Edition is made in partnership with FlysABunch LLC. Andrew had a few small requests that differed from the standard frame, so we’ve decided to offer his own variant. These differences include toilet tank mounting, engravements, and custom standoffs/3d prints. In essence purchasing this directly supports Andrew and you can find more information about him on the collaboration tab.
All frames are made with high quality t700 carbon and include all the hardware you’ll need
Whether you’re trying to meet a certain weight goal or are just in need of an ultra lite cinewhoop look no further. Countless hours and many reiterations later, I am pleased to introduce my very first frame.
Purchasing will also grant access to my actual tuning profile along with every 3d print for varying setups. Speaking of setups here is a recommended parts list:
-1404 Motors 3500-5000kv (9×9 Mounting)
-Any 35a or 45a 25×25 aio
-DJI O4 Pro recommended but any vtx with 20×20 or 25×25 mounting will work
Weight(s)
-Frame 37g
-Drone 149g (GepRC 1404’s 4600kv, GepRC 35a aio, DJI O4 Pro)
-AUW 279g (GoPro Bones and Tattu 650mah) A standard naked GoPro should get you sub250, worst case you’d have to pair that with a 550 or 600mah battery. If that’s what you’re after)
*The FAB Edition is made in partnership with FlysABunch LLC. Andrew had a few small requests that differed from the standard frame, so we’ve decided to offer his own variant. These differences include toilet tank mounting, engravements, and custom standoffs/3d prints. In essence purchasing this directly supports Andrew and you can find more information about him on the collaboration tab.
All frames are made with high quality t700 carbon and include all the hardware you’ll need
Whether you’re trying to meet a certain weight goal or are just in need of an ultra lite cinewhoop look no further. Countless hours and many reiterations later, I am pleased to introduce my very first frame.
Purchasing will also grant access to my actual tuning profile along with every 3d print for varying setups. Speaking of setups here is a recommended parts list:
-1404 Motors 3500-5000kv (9×9 Mounting)
-Any 35a or 45a 25×25 aio
-DJI O4 Pro recommended but any vtx with 20×20 or 25×25 mounting will work
Weight(s)
-Frame 37g
-Drone 149g (GepRC 1404’s 4600kv, GepRC 35a aio, DJI O4 Pro)
-AUW 279g (GoPro Bones and Tattu 650mah) A standard naked GoPro should get you sub250, worst case you’d have to pair that with a 550 or 600mah battery. If that’s what you’re after)
*The FAB Edition is made in partnership with FlysABunch LLC. Andrew had a few small requests that differed from the standard frame, so we’ve decided to offer his own variant. These differences include toilet tank mounting, engravements, and custom standoffs/3d prints. In essence purchasing this directly supports Andrew and you can find more information about him on the collaboration tab.
All frames are made with high quality t700 carbon and include all the hardware you’ll need